 |
Grinder:
Norton:
1.17 metre diameter, 7.8metres long
Kamenicek:
600mm diameter, 2.7metres long
Churchill Grinder 1:
500mm diameter, 2.2metres long
Churchill Grinder 2:
1metre diameter, 2.2metres long
Hartex:
300mm diameter, 750mm long
Internal attachment:
355mm I.D. x 760mm
Lathe:
AIS:
1400mm diameter, 8 metres long
Mazak:
970mm diameter, 5mtres long
Russian:
650mm diameter, 3metres long
Binns & Berry:
650mm diameter, 2metres long
Colchester:
380mm diameter, 1.3metres long
Borer:
Richards:
3metres diameter of table
75 inches height (from table to bridge)
44 inch stroke capability
Capital:
66 inches diameter of table
44 inches height from table
26 inch stroke (41 inches over the table)
Kearns:
Horizontal Borer: 1.2m x 1.2m x 0.8m
Surface Grinder:
Blohm:
400mm diameter, 1.5metres long
Milling:
Table: 600 x 1500 x 350
|
|
Drill:
Csepel:
width 1540mm
length 3150mm
table to spindle 2 metres
spindle to ground 2340mm
Ocnopad:
width 1000mm
Length 1780mm
Table to spindle 1600mm
Spindle to ground 1860mm
Ausino:
width 780mm
Length 1150mm
Table to spindle 940mm
Spindle to ground 1210mm
Factory floor:
9.1m clearance under crane
11.7metres ground to roof
6.5metre roller door clearance
Two 20 tonne cranes, one in each bay.
One bay also has a 10 tonne crane.
Spray Booths:
Height: 3.7m
Width: 5m
Total length: 22m
Welding Capacity:
Plasma Transferred Arc Process (PTA) with 9 axis robotic welding cell
Pulsed M.I.G. and T.I.G.
Open Arc
Submerged Arc
Automated Arc Hardfacing
Thermal Spray:
HVOF
HVAF (with 7 axis robotic welding cell)
DC Plasma
Arc Spray
HVOF Arc Spray
|
|
Web Design Melbourne by Leading Edge